24-hour service hotline 18344181076
- 24 hours phone: 18344181076
- After sales phone: 18682487567
- Website: http://rdhsfz.com
- Address: Building A, Jiatu Industrial Park, No. 2 Yijia Road, Jutang Community, Fucheng Street, Longhua District, Shenzhen
Maintenance of the three-roller brake is very important. The maintenance of the three-roller gate directly affects the service life of the three-roller gate. Therefore, the regular maintenance and maintenance of the three-roller gate must be carried out regularly as required. Therefore, Litian Machinery recommends that you must understand the importance of maintaining the three roller gates. General maintenance should pay attention to the following points
In China, most three-roller gates are made of 304 stainless steel. They are cleaned once a week to remove rust spots. The surface of the chassis is cleaned with a thin cloth and fossil powder, and then coated with rust inhibitor. Freshly applied rust preventive must not be rubbed by hand. After natural air-drying for 3-5 hours, you can only touch it with your hands, otherwise the actual effect of surface antirust treatment will be damaged.
Machine core maintenance and care
The core of the machine is the core of the equipment and must be constantly maintained and maintained. It is usually overhauled once a month, open the top cover, disconnect the power switch, remove the dust on the top cover, and add unsalted butter or high concentration automobile oil to the drive system. Check whether the standard parts are loose, tighten the standard parts, check the damage of the parts, the precisely positioned arms and precision positioning discs are more than 3 mm, and immediately eliminate the gap. The motor oil relay valve relay moves up and down. Reduce frictional resistance and get lubricated, not too much, be appropriate.
Power line maintenance
According to the previous application, if there is any problem in the motor control part, if there is no problem, check whether the switching power supply is exposed, if the tie is exposed, comb the cable in many aspects, whether the cable is fragile, delete it, refer to the operation instructions of the three roller brake Check that the main parameters are everywhere. In order to find out the problem, we should peel off the cocoon, find out the source of the problem, and remove some electronic components.
The above repairs must be repaired by someone, especially the electronic control part. Only trained professionals who fully understand the principles of electronic control can work on duty.